PRODUCTS
Everything your operation needs to run smoothly
Meet Your New Assistants
STATIONARY AEI READER FOR RAILCARS
The Denali consists of a AEI Reader with two antennas, a cellular modem and a presence detector. All processing of data is performed by a central AEI Reader Server, which retrieves the raw AEI tag and sensor data, creates a train consist and distributes this data securely to the cloud.
With this equipment you can feel confident knowing when cars pass, even at speeds up to 40 mph. Integrating a Denali AEI Reader into your railyard, will significantly reduce your demurrage costs, resulting in a quick ROI.
Can be equipped with a solar option, that will make the Denali AEI Reader completely wireless.
Developed for industrial rail shippers and short line railroads looking for an economical means to automatically identify rail cars on low speed tracks (less than 40 miles per hour) or at a yard entrance.
Key Features
- Fixed AEI Reader with solar power option
- Cellular option is available
- Reading speeds to 40 MPH
- Fully rugged solution built to work in the harsh enviroments (enclosure IP66)
- Quick ROI especially with demurrage issues
- The Denali reads railroad transportation tags AT5110, AT5118, AT5125, AT5133, AT5510, AT5541 and AT5549.
- It has both a USB and Ethernet LAN interface. Up to six devices can simultaneously make a network connection and receive AEI tag data.
- The Denali reader can connect two antennas. A single reader can read tags on both sides of a rail vehicle.
- The Denali reader has two digital inputs and two digital outputs.
- Custom build options are available.
Product Specs
| Operating temp- 40*c- 60*c |
| There are seven main components in the controller’s enclosure. These are: |
|---|
| AEI RF Reader |
| Cellular Modem |
| Ethernet Switch |
| Terminal Block |
| 12 VDC Power Supply or 24 VDC to 12 VDC converter |
| 5 VDC Power Supply or 24 VDC to 5 VDC converter |
| The 120/240 VAC version of the system uses the 12 VDC and 5 VDC power supplies. |
| There are six cable connections that must be made with the Controller. The following is the list of connections: |
| Near antenna 1 coaxial cable (connector is N-Female) |
| Far antenna 2 coaxial cable (connector is N-Female) |
| Ground stud |
| 120 VAC power cable |
| M-Gage presence sensor four wires to terminal block |
| Cellular modem antenna |
| The Denali Reader Solar System shipment contains the following items: |
| Two external antennas and pole mounting brackets (one has a M-Gage presence sensor attached) |
| One Denali Reader Board mounted in the SunWize enclosure (which includes the AEI RF reader, cellular modem, 12 VDC to 5 VDC converter) |
| One 10 foot and one 40 foot coaxial cable |
| Two test AEI tags |
| SunWize Solar System (which includes enclosure, battery, solar panel, control panel and mounting hardware) |
Cellular Modem
The standard Denali AEI Reader includes a cellular modem with a static IP. The AEI Reader Server uses this cellular connection to retrieve data from the Denali AEI Reader and obtain its status. A connection can also be made through a customer’s network, which would further lower the cost by eliminating the cellular modem and the associated service charges.
fast-scanning AEI reader and tablet
Fully customizable rugged handheld tablet. The Aspen tablet provides rugged mobility and accuracy while managing rail yard activities. Utilizing the RFID scanner you will be able to efficiently manage yard inventory, complete inspections, and can capture transload data. The Aspen tablet will bring AEI Reader functionality to any third party applications.
Enabled with 4G, Wifi, and Bluetooth capabilities and features a front and rear camera. Equipped with a wide temperature 10000mAH battery. IP67 highly reliable, sunlight readable screen with capacitive touch, water/dust proof; drop resistance from 4 ft. Optional functions like barcode scanning, RFID reader, and fingerprint identification available.
Product Features
- Aspen adopts Qualcomm MSM8953 Octa core 2GHz CPU and Android 9.0 operation system; 4G RAM,64G ROM,4G LTE.
- 1980*1200 500 nits screen is readable under sunlight; Optional functions like barcode scanning, RFID reader, fingerprint identification.
- It has 10000mAH battery (Wide temperature battery); IP67 high reliable three-proof structure water/dust proof; drop resistance from 1.2m.
- Advanced system – Android 9.0 operating system; CPU MSM8953, 8 core, 2GHz CPU; RAM 4GB ROM 64GB, Micro SD 128G
- Visible under strong light – 7-inch LCD screen, 1920×1200 IPS capacitive touch screen with 500 nits brightness
- Powerful function – Multi function1D/2D bar code scanning, LF/HF/UHF RFID reader, fingerprint identification)
- Multi communication modes – 3G/4G, WIFI, Bluetooth and many wireless communication modes
- Support jacket extension – Satisfy custom applications from customers
- Certification – CCC/CE/ROSH/FCC/IP67/MIL-STD-810 SPECIFICATIONS
Product Specs
| Standard Function | |
|---|---|
| Operating System | Android 9.0 |
| CPU | MSM8953, 8 core CPU, 2GHz |
| RAM | RAM: 4GB FLASH: 64GB |
| Extended Storage | Micro SD, Maximum 256G |
| USB port | Type-C USB port; Support to connect U-disk/Mouse/Keyboard/OTG line |
| HDMI | HDMI port |
| OTG | Through OTG can meet 100M network port, network card setup, PPPoE dial-up, web browsing. Support OTG extend RS232 serial port/485 serial port/RJ45 Serial port |
| External port | Charge port, headphone port |
| Protection Grade | |
| Industrial Protection Grade | IP67 |
| Drop Grade | Drop resistance from 1.2m |
| Wireless Communication | |
| Bluetooth | Support 4.2 |
| GPS | GPS+BDS +GLONASS Support high precise GPS module (Ublox M8N/M8P,accuracy is 0.5 -3M) |
| 2G/3G/4G LTE | China/India: LTE FDD:B1/B3/B5/B5 LTE TDD:B34/B38/B39/B40/B41 WCDMA:B1/B8 TD-SCDMA:B34/B39 EVDO/CDMA:BC0 GSM:900/1800MHZEurope/Africa: LTE FDD:B1/B3/B5/B7/B8/B20/B28A LTE TDD:B38/B40/B41 WCDMA:B1/B2/B5/B8 GSM:850/900/1800/1900MHZ America: |
| Physical Parameters | |
| Display Screen | 7 inch LCD screen, 1920*1200IPS brightness standard, capacitive touch screen |
| Keyboard | Android menu, Homepage, Return, Volume, Barcode, ON/OFF, Reset |
| Camera | 5 million pixels front camera, 13 million pixels rear camera with automatic focus and lighting function |
| Headset | 3.5mm audio Interface, has MIC and Single loudspeaker |
| LED indicator light | Support (ordinary flicker, Call fast flicker, missed calls, charge indicator) |
| Flashlight Function | Support, can be used for emergency lighting |
| Googleplay store | Support |
| Gravity sensor | Support |
| Compass | Support |
| Gyroscopes | NOT Support |
| Acceleration sensors | Support |
| Light and distance sensor | Support |
| Vibrating motor | Support |
| FM | Support |
| Rechargeable Lithium Battery | 3.8V, 10000mAh temperature wide battery |
| Dimension | 232*158*22 |
| Weight | 810g |
| Environmental Characteristics | |
| Working Temperature | -20 ~ +55 |
| Storage Temperature | -40 ~ +70 |
| Humidity | 5%-95% relative humidity; no condensation |
| Optional function | |
| Barcode Scanning | 1D Laser Scanner Index (Internal): Honeywell N4313 or Zebra EM1350 Scanning speed: 104 times/second+12 times/second (two-way scanning) Scanning distance: 2.5cm-114.3cm Scanning angle: 47±3¡(default) /35±3¡(reduced code)2D Barcode Scanner Ind ex( Internal): Newlands EM3096 Honeywell N3680 Motorola SE4750 Honeywell N6603 Identification ability: 1D, 2D, OCR Scanning angle: rotate 360¡, incline±50¡, deflection ±50¡ Field of View: Horizontal 36¡, vertical 23¡ Depth of field: 4cm-23.5cm Environmental luminance: 0~100,000 LUX |
| RFID | HF RFID ( Internal): Support NFC/NXP,13.56MHZ ISO14443A,B and ISO15693 protocol, reading distance 0-3cm,Tag support type:SR176,SRIX4K T• YPE-B ,I,-Code2,TI RFID Tag -it HF-I,EM4034,Mifare Classic ETC LF RFID: 134.2KHZ LF RFID, support ISO11784/5 protocol, support to read IC card(FDX/HDX), 125KHZ LF RFID, support to read ID card UHF RFID: Internal, Ray links RLM060 or ThingMagic M6E-NANO,EPC C1 GEN2/ISO 18000-6C,output power 10dBm-30dBm, Reading distance: 1 m, Ceramic antenna: 0.3db (25*25*4 mm) |
| Far infrared meter reading | Working frequency 37.9K |
| Fingerprint read module | Supports fingerprint entry, image collection, fingerprint recognition, fingerprint deletion etc. Type: TCSIST Sensor type: capacitive Effective image size:12.8mm x 18.0mm Image size: 256*360 Resolution:508 ppi (dpi) Contrast mode(1:1); search mode(1:N) FIPS 201 compliant capability (TCS1) |
class 1, div 2 certified AEI tablet
Intrinsically safe handheld AEI reader, Class 1, Div 2 certification for hazardous locations. This handheld AEI reader offers best-in-class features, including an ultra-rugged ergonomic design, sunlight-readable display, and all-day battery life. A feature-rich handheld AEI reader that provides both windows 10 and android 9.0 will become the ultimate device for a variety of mobile data collection applications.
Product Features
Atlas rugged tablets carry out the entire data collection process with ease from start to finish. Snap a photo, record field notes, capture a GNSS location, and analyze data – all in the palm of your hand. Its high speed processor, Class 1 Div 2 Intrinsically Safe and ergonomic design ensure maximum efficiency and minimal fatigue. With all the functionality of a desktop computer packed into one ultra-tough tablet, the Atlas will truly become your office, anywhere
- Waterproof, dustproof, shockproof
- Extreme temperature endurance
- Ergonomic design for minimal user fatigue
- All-day battery life
- Large 7’’ sunlight-readable display
- High speed processor options
- Class 1 Div 2 Intrinsically Safe
- Designed and assembled in the United States
- Live and individualized customer support
- Customizable
Product Specs
| PROCESSOR |
|---|
| Qualcomm® Snapdragon™ |
| Octa-core Kryo™ 260 |
| OPERATING SYSTEM AND SOFTWARE |
| Android 9.0 (GMS) |
| Multiple languages supported (English, French, Spanish, German, Portuguese) |
| MEMORY |
| 6 GB LPDDR4x |
| STORAGE |
| 64 GB eMMC Flash Storage, MicroSDXC card slot |
| WIRELESS CONNECTIVITY |
| Long-range Bluetooth® Smart Ready wireless technology, v5.0 + EDR, Class 1.5, BLE support |
| Wi-Fi 802.11 a/b/g/n/ac, 2.4 GHz and 5 GHz |
| 2×2 MIMO |
| 4G LTE multi-carrier capable |
| GRAPHICS |
| Qualcomm® Adreno™ 512 GPU |
| DISPLAY |
| Active viewing area: 7” (178 mm) |
| Resolution: WXGA (1280 x 800) |
| High-visibility backlit LCD for best-in-class sunlight view-ability |
| Portrait or landscape orientation with automatic screen rotation |
| TOUCHSCREEN |
| Projected capacitive multi-touch interface for use with gloves, small tip stylus, and in wet conditions |
| Optically bonded for increased visibility and strength |
| Chemically-strengthened Dragontrail™ High Ion-Exchange (HIE™) cover glass for excellent impact and scratch resistance |
| KEYPAD |
| Adjustable LED backlit keys |
| Four-way directional navpad |
| Home key |
| Power key |
| Enter key |
| User-programmable function keys |
| OEM configurable/customizable |
| JUNIPER RUGGED™ |
| IP68 waterproof & dustproof –Water: 1.4 m (4′ 7″) for 2 hours |
| Operating temperature: -4 F to 122 F (-20 C to 50 C) |
| Storage temperature: -22 F to 158 F (-30 C to 70 C) |
| Shockproof: multiple drops from 4′ (1.2 –1.5 m) onto concrete |
| Designed to meet MIL-STD-810G test procedures: Method 500.5 Low Pressure (Altitude); Method 501.5 High Temperature; Method 502.5 Low Temperature; Method 503.5 Temperature Shock; Method 506.5 Rain; Method 507.5 Humidity; Method 510.5 Sand and Dust; Method 512.5 Immersion; Method 514.6 Vibration; Method 516.6 Shock |
| PORTS |
| 12V DC power input jack |
| USB-C, USB 3.1OTG no battery charging x 1 |
| Optional RS-232 9-Pin D-Sub connector with 5V DC or 12V DC power output |
| Dock connector (Pwr, USB 2.0, & HDMI) |
| BATTERY |
| Removable Li-Ion battery, 43.2 Whr |
| Operates 10–12 hours on one charge |
| Removable battery, easily changeable in field |
| Optimized for strong performance in cold temperatures |
| Excellent lifecycle performance |
| Optional internal 21.6 Whr battery provides hot-swap capability and an additional 5–6 hours runtime |
| PHYSICAL |
| Size: 5.40” w x 8.48” l x 1.36” d (137 x 215 x 35 mm) |
| Weight: 1.5–2 lbs (680–907 g) depending on battery and expansion configuration |
| Durable, chemical- and shock-resistant design |
| Easy-to-grip, impact-absorbing, overmolded bumpers |
| Lightweight and ergonomic design |
 |
| CAMERA |
| Rear 16 MP with LED illumination |
| Front 2 MP |
| GPS/GNSS |
| Qualcomm SDR660 GNSS receiver and integrated antenna |
| Integrated real-time SBAS receiver (WAAS, EGNOS, etc.) |
| Supports GPS, GLONASS, & Galieo worldwide; BeiDou & QZSS outside the U.S. |
| BARCODE 1D/2D IMAGER (BARCODE MODELS) |
| Optional built-in barcode imager and decoder |
| Symbologies: all common 1D and 2D (PDF417, MicroPDF417, Composite, RSS, TLC-39, Data matrix, QR code, Micro QR code, Aztec, MaxiCode, Postal codes, etc.) |
| Programmable trigger buttons |
| Visible aiming bullseye with low-light illumination |
| Barcode Connector™ utility, wedge and configuration, SDK support available |
 |
| UHF RFID (RFID MODELS) |
| Optional built-in UHF RFID module and internal antenna |
| Region-specific frequency configurations (859–873 MHz & 915–930 MHz) |
| EPCglobal Gen 2 (ISO 18000-6C) protocol support |
| Wide output range (0 dBm to +27 dBm) |
| OTHER FEATURES |
| Ambient light sensor |
| Compass |
| Accelerometer |
| Gyroscope |
| CERTIFICATIONS AND STANDARDS |
| FCC Class B |
| CE Marking |
| Industry Canada |
| EN62368 Safety |
| RoHS 2 Compliant |
| Prop 65 |
| Optional Class I, II, & III, Division 2, Groups A, B, C, D, F, G |
| STANDARD ACCESSORIES |
| Standard removable battery |
| AC wall charger with international plug kit |
| Capacitive small-tip stylus w/tether |
| Quick Start Guide |
| Hand strap |
| Connector port dust cover |
| 2-year warranty |
| CUSTOMIZATION |
| Available upon request |
handheld, pistol grip AEI reader
Zion is a handheld reader that was developed with the android system, which integrates 1D or 2D bar code scanning, 4G Netcom, GPRS, portable intelligent data acquisition equipment with WIFI, bluetooth and RFID functions, with a user-friendly interface and easy operation with “thing magic” high-performance module and with the advantages of efficient inventory checking, remote scanning and accurate reading, and is suitable for warehousing and logistics, multi-scenario applications such as smart stores and archive books.
Product Features
- Simple body design, high-definition large screen display
This machine adopts a simple body design and is used on a 5.5-inch IPS HD display screen of Corning Gorilla. 1440*720. The resolution and corner arc design give consideration to the comfortable hand feeling and the fall resistance of the machine itself. - Powerful fast charging and WiFi roaming
This machine is equipped with 9000mAh lithium polymer battery, with long endurance, fast charging function and single charging duration. Shorter. And powerful WiFi roaming function, which can realize seamless Wifi hotspot switching and maintain uninterrupted network connection experience. - Excellent RFID read/write function and multi-tag remote read/write
This machine adopts omni-directional spiral antenna, professional scanning handle and shield, and supports UHF single label and multi-label reading, distance Further distance, faster efficiency, more stable overall performance, and effective reading distance up to
20m
Product Specs
| Product Technical Parameters | |
|---|---|
| Size | 166*79*31±2mm (excluding shield handle) |
| Weight | 650g |
| Display | 5.5-inch IPS HD screen with 720*1440 resolution |
| Touch screen | Corning Gorilla third generation industrial grade multi-touch capacitive screen |
| Expansion Slot | 1 Sim card slot (MUP-C785)1 TF card slot 1 PSAM slot (MUP-C785) |
| Communication Interface | 1 Type-c interface |
| Indicator lamp | Network indicator light, charging indicator light |
| Keyboard | Scan key and function key |
| GPS navigation | GPS/BeiDou navigation Optional, error range ± 5m |
| Performance Parameter | |
| CPU | MT6771 eight-core 64-bit processor Four cores A73 + four small cores A53, with a dominant frequency of 2.0GHz |
| Memory Capacity | RAM:2GB ROM:16GB (standard) RAM:4GB ROM:64GB (optional) |
| Operating system | Android 9.0 |
| Extended memory | Support 256GB Micro T cards |
| Data Communications | |
| 4G | TD-LTEBand38/39/40/41FDD-LTEBand1,2,3,4,7,17,20 |
| 3G | WCDMA(850/1900/2100MHz) |
| 2G | GSM/GPRS/Edge(850/900/1800/1900MHz) |
| WIFE | 2.4G/5G dual band, compliant with IEEE802.11a/B/g/n/ac Supports Wifi roaming (seamless switching) |
| Bluetooth | complies with influooth4.2 |
| Work Environment | |
| Operating temperature | -20℃ ~ 50℃ |
| Storage Temperature | -20℃ ~ 70℃ |
| Relative humidity | 5% ~ 95% does not condense |
| Protection level | IP65 |
| Enclosure | |
| Standard | One standard lithium battery, one charging head and one Type-c charging |
| Optional | Recharge stand |
| Battery performance | |
| Battery capacity | 9000mAh lithium polymer battery, voltage 3.8V |
| Standby time | Theoretically, the wireless communication function can be turned off for 360 hours. |
| Duration of charge | Less than 2 hours (supports 5V2A/PE2.0 16W fast charging) |
| Working hours | More than 14 hours (fully charged at a time) |
| Camera (optional) | |
| Camera (optional) | Front 500W pixel camera |
| Rear camera | Rear 1300W/2000W pixel camera available, with flash, auto focus function |
| NFC (optional) | |
| Operating Frequency | 13.56MHz |
| Protocol | ISO14443A/B ISO15693, NFC-IP1,NFC-IP2, etc. |
| Label Standard | M1 card (S50,S70),CPU card, NFC tag, etc. |
| Read/write distance | 5-10cm |
| Barcode collection | |
| Two-dimensional bar code | |
| 2D scan engine | Zebra SE4710/Zebra SE2100/others |
| Supports two-dimensional bar code types. | PDF417,MicroPDF417,Composite,RSS,TLC-39,Datamatrix,QRcode,MicroQRcode,Aztec,MaxiCode, PostalCodes,USPostNet,USPlanet,UKPostal,AustralianPostal,JapanPostal,DutchPostal, etc. |
| RFID (optional) | |
| UHF(Superhigh frequency) | |
| RFID module | ThingMagic M6E-Micro module |
| Supported frequency | 915MHz, 865MHz(865-868MHz or 902-928MHz) |
| Supported protocols | GEN2ISO18000-6C protocol for EPC C1 |
| Reading distance | 0-20 m distance (related to labels and Environment) |
| High frequency | |
| Supported frequency | 13.56MHz |
| Supported protocols | For ISO15693 and ISO14443 dual protocols |
| Reading distance | 0-7cm (related to labels and Environment) |
| High Frequency (CPU card) | Supports reading and writing CPU cards and using PSAM |
| Low frequency | 125K/134 K animal ear tags |
| Active 2.45G (customized) | Distance 200 m 200 tags can be read at one time |
solar-equipped wayside AEI reader
No electrician is needed, great for remote locations, environmentally friendly. The savings of solar is at your fingertips.
Transform your operation with a completely
Wireless powerful wayside AEI reader powered by solar.
Constructed with high efficient polycrystalline solar cells to produce a higher output per module than others in its class. Installing solar over traditional electrical power can save you up to $10,000 in installation cost and at least $600 a year.
Cut back on installation cost, solar has you up and running in no time.
Key Features
- Fixed AEI Reader with solar power option
- Cellular option is available
- Reading speeds to 40 MPH
- Fully rugged solution built to work in the harsh enviroments (enclosure IP66)
- Quick ROI especially with demurrage issues
- The Solar reads railroad transportation tags AT5110, AT5118, AT5125, AT5133, AT5510, AT5541 and AT5549.
- It has both a USB and Ethernet LAN interface. Up to six devices can simultaneously make a network connection and receive AEI tag data.
- The Solar reader can connect two antennas. A single reader can read tags on both sides of a rail vehicle.
- The Solar reader has two digital inputs and two digital outputs.
- Custom build options are available.
- Class 1, Division 2, (C1D2) Group A, B, C and D
- Up to 256 days onboard data logging
- Pre-wired, fully assembled, QC tested
- Two (2) load connections
- Separated breakers for the array, battery and load
Product Specs
| Operating temp- 40*c- 60*c |
| There are seven main components in the controller’s enclosure. These are: |
|---|
| AEI RF Reader |
| Cellular Modem |
| Ethernet Switch |
| Terminal Block |
| 12 VDC Power Supply or 24 VDC to 12 VDC converter |
| 5 VDC Power Supply or 24 VDC to 5 VDC converter |
| The 120/240 VAC version of the system uses the 12 VDC and 5 VDC power supplies. |
| There are six cable connections that must be made with the Controller. The following is the list of connections: |
| Near antenna 1 coaxial cable (connector is N-Female) |
| Far antenna 2 coaxial cable (connector is N-Female) |
| Ground stud |
| 120 VAC power cable |
| M-Gage presence sensor four wires to terminal block |
| Cellular modem antenna |
| The Solar Reader Solar System shipment contains the following items: |
| Two external antennas and pole mounting brackets (one has a M-Gage presence sensor attached) |
| One Solar Reader Board mounted in the SunWize enclosure (which includes the AEI RF reader, cellular modem, 12 VDC to 5 VDC converter) |
| One 10 foot and one 40 foot coaxial cable |
| Two test AEI tags |
| SunWize Solar System (which includes enclosure, battery, solar panel, control panel and mounting hardware) |
| Characteristics: |
| Max power (Pm) – 90W |
| Nominal Voltage – 12V |
| Maximum system voltage – 600V |
| Dimensions – 47.4in(1204mm)x21.2in(537mm)x1.97in(50mm) |
| Operating Temperature – -40*C- 90*C |
| Controller Specs: |
| Max Battery & Load Current – 15 |
| Additional Specs: |
| Operating Temperature -40*C- 90*C |
| Self Power Consumption – 20 milliamps |
| Battery Voltage Range – 10-35 |
Cellular Modem
The standard Denali AEI Reader includes a cellular modem with a static IP. The AEI Reader Server uses this cellular connection to retrieve data from the Denali AEI Reader and obtain its status. A connection can also be made through a customer’s network, which would further lower the cost by eliminating the cellular modem and the associated service charges.
ultra-rugged, waterproof industrial tablet
Sierra rugged tablet is a modern, waterproof industrial tablet designed for extreme applications and the harshest conditions. It has a specially designed, reinforced construction that meets the requirements of IP67, which confirms the protection of the device against dust and water. Specifically designed for data collection on the rail and off.
Product Features
- Android 10.0, Fast running speed, stable – performance and convenient operation; Qualcomm MSM8953, Adreno 506GPU, 8 core, 2GHz CPU, RAM 4GB ROM 64GB, Micro SD 512GB
- IP68 three protection grade, drop resistance from 1.2m
- 10 inch LCD screen, 1920*1200 IPS capacitive touch screen
- Google Play store and free SDK
- 1D/2D bar code scanning, NFC/UHF RFID reader, fingerprint identification
- 3G/4G, WIFI, Bluetooth, GPS
- 38Wh, 10000mAh，endurance is about 12 hours
- CCC/CE/ROSH/FCC/IP68/MIL-STD-810G
- 277x183x19mm, 1109g
Product Specs
| General Specs | |
|---|---|
| Display Screen | 10 inch LCD screen, 1920*1200 IPS screen, capacitive screen, Corning Gorilla Glass (supports passive capacitive pen and can be operated by wet hands) ,500 NITS |
| Operating System | Android 10.0 |
| CPU | Qualcomm MSM8953, 8 core, 2GHz, RAM 4GB ROM 64GB, Micro SD maximum 512GB |
| I/O port | RJ45 port*1, Mini HDMI port*1, USB 3.0 port*1, Type C port*1,DC port*1,3.5mm headphone port*1, Docking Station pogo pin*1,NANO SIM card slot*2, SD card slot*1, support OTG (Through OTG can meet 100M network port, network card setup, Support OTG extend RS232 serial port/485 serial port/ U-disk/Mouse/Keyboard) |
| Wireless Communication | |
| Bluetooth | 4.2，distance 10m |
| GPS | Support GPS, BDS, GLONASS， accuracy about 10 meters |
| WIFI | IEEE 802.11a/b/g/n/ac, 2.4G and 5G dual band |
| 2G/3G/4G | LTE FDD: B1/B2/B3/B4/B5/B7/B8/B20/B28 LTE TDD: B38/B39/B40/B41 WCDMA: B1/B2/B4/B5/B8 GSM: 850/900/1800/1900MHz |
| Physical Parameters | |
| Camera | 5 MP front camera, 13 MP rear camera with automatic focus and lighting function |
| Keyboard | Android menu, Homepage, Return, Volume+ -, Function button F1 and F2, ON/OFF |
| Headset | 3.5mm audio Interface |
| Mic and Loudspeaker | Support |
| LED indicator light | Status light*1,Charging indicator light*1 |
| Sensor | Support Gravity sensor, electronic compass, gyroscope, ambient light and distance sensor |
| FM | Support |
| Lithium Battery | 10000mAh /38Wh, Removable, Support Quick charging QC3.0, Hot swap |
| Dimension | 277x183x19mm |
| Weight | 1109g |
| Color | Gray |
| Protection Grade | |
| Industrial Protection Grade | IP68 |
| Drop Grade | Drop resistance from 1.2m |
| Environmental Characteristics | |
| Working Temperature | -20℃ ~ +60℃ |
| Storage Temperature | -40℃ ~ +60℃ |
| Humidity | 5%-95% relative humidity; no condensation |
| Optional Function | |
| 1D/2D Barcode Scanning | 2D laser barcode scanner: Honeywell 6603/NLS N1 |
| RFID | NFC (HF) RFID: Working frequency: 13.56MHZ compatible with ISO14443A, B and ISO15693 protocols, supports Mifare card, and the recognition distance is 0-3cm.LF RFID: 134.2KHZ LF RFID, support ISO11784/5 protocol, support to read IC card(FDX/HDX) 125KHZ LF RFID, support to read ID cardUHF RFID reader: A: 865-868MHZ(European Standard) Single tag: 0.7m Group reading: 0.2m B: 902-928MHZ(American Standard) Single tag: 1m Group reading: 0.2m |
| Fingerprint | A: FBI fingerprint B: Normal |
| High precise GPS | Ublox M8N, GPS+BDS+GLONASS, accuracy about 3meters |
Function and Interface
